General Options

This name will appear on the header line of all print-outs: results and pictures.

This name will appear on the bottom right hand side of the footer on all print-outs: results and pictures.

List of available serial ports to configure the capture button.

• Keyboard keyboard capture is used when Keyboard is selected instead of a serial port.

When checked and Timed Capture is used, this feature enables manual capture outside the timed capture settings.

• None When selected, FinishLynx is used in reader mode and will not try to load any EtherLynx or IdentiLynx cameras.
• SCSI When selected, FinishLynx will only try to load SCSI Lynx cameras.
• Ethernet When selected, FinishLynx will only try to load EtherLynx or IdentiLynx cameras.
• Detect (default) When selected, FinishLynx will load all detected SCSI, EtherLynx or IdentiLynx cameras.

• <not specified> The Network Interface Card (NIC) used to find cameras is not defined. FinishLynx will attempt to load cameras from each NIC.
• 192.168.0.5 Default value. This IP address is recommended for the NIC used to load cameras.
• ###.###.###.### Value of other NICs found by FinishLynx on your computer.

List of available ports to connect the Remote Control Commands.

• For more information on the other settings, see Port Settings.

List of available fonts to be used in the FinishLynx interface.

• Font size box (free-text) Enter the preferred font size.
• Bold (checkbox) When checked, text in the FinishLynx interface will appear in bold.

FinishLynx is available in the following languages:

• Arabic
• Chinese (Simp.)
• Chinese (Trad.)
• Deutsch
• Espanol
• Suomi
• Français
• Magyar
• Italian
• Korea
• Polish
• Portuguese (Brazil)
• Russian
• Swedish

See Customizing the FinishLynx User Interface to learn how to use a different language.

<standard> represents the default Profile. List is populated with additional built-in (VeriLynx) or user defined profiles.