FinishLynx 12.21

What's New

TIP: To preserve your current settings, do not uninstall the old version.

VeriLight Support

VeriLight, an Ethernet (PoE) device, can be managed from VeriLynx, FinishLynx(or FieldLynx) and serves as a multi-purpose, remote-controlled, indicator light. Use it with VeriLynx to show foul/valid attempts or with FinishLynx to show when a race is armed and ready for the next start.

TIP: VeriLight defaults to 192.168.0.99 and listening on port 10000.
  • To use VeriLight with VeriLynx:
  1. Alt-F (VeriLight | Foul) will toggle VeriLight red/off to indicate a foul.
  2. Alt-V (VeriLight | Valid) will toggle VeriLight green/off.
  • To use VeriLight with FinishLynx:
  1. Create a new scoreboard object.
  2. Select VeriLight_Ready.lss
  3. Set the IP Address and Port to 192.168.0.99 and 10000.
  4. Set Running time = Auto
  5. Simply arm the next event for VeriLight to light up green. It will turn off after a start signal is received.

Scoreboard Scripts

  • VeriLight.lss is added.
  • VeriLight_Ready.lss is added.

  • ResulTV_VeriLynx.lss can show valid/foul on ResulTV standard layouts when using the VeriLynx profile.

  • ResulTV_Video_VeriLynx.lss can show valid/foul on ResulTV video layouts when using the VeriLynx profile.

  • ResulTV_Video_1line.lss is updated to display the wind in the header row when applicable.

  • ResulTV_Video_3lines.lss is updated to display the wind in the header row when applicable.

  • ResulTV_Video_1line-360.lss is a customized ResulTV video layout for the Lynx 360 display.

  • ResulTV_AutoSwitch.lss simplifies setting up layout switching.

  • VDMPlaceNameTime.lss is updated to display the wind in the header row when applicable.
  • Nevco_123.lss is updated.
  • Nevco_Matrix.lss is added.
  • Nevco_x6xx.lss is added.

Language (LNG) File Updates

  • de_DE.lng
  • en_VL.lng

White Balance Defaults

When a Vision-Series camera is initially booted it will use updated white balance default values:

  • Vision (5L500): RGB = 90,0,120
  • Vision PRO (5L600): RGB = 90,0,60

User Interface Improvements

  • Internal RadioLynx Frequency selecetion box(Camera Settings | RadioLynx tab) displays the corresponding HiLink value between brackets (e.g. 0001(47) where 47 is the HiLink equivalent of 0001).

Installer Updates

  • The en_US.lng is no longer overwritten when a new version is installed.
NOTE: Run FinishLynx as Administrator (right-click shortcut + Run As Administrator) for best performance.

ADVANCED - Other Settings

Additional Other (hidden) settings are included:

  • Event\LargeFile now defaults to 15000 (240mb).
  • Event\WarnCropped now defaults to 0 (disabled).
  • Scoreboard\#\TCPEchoBytes determines if data received from a device are echoed back (legacy/default) or not (value = 0)